Basic Info.
Feature
Waterproof, Chemical Proof
Product Description
Solas approved CCS disposable chemical suit
1. disposable chemical suit
A. Main Technical Parameters
No. | Item | Indicator |
1 | Waterproof performance | No leakage |
2 | Tensile strength Warp, Weft | ≥450 N/5cm |
3 | Tear strength Warp, Weft | ≥32 N |
4 | Acid-permeation proof performance 80% H2SO4,60% HNO3,30% HCL | Keeping impermeative for 1h. |
5 | Alkali-permeation proof performance 6.1mol/L NaOH | Keeping impermeative for 1h. |
6 | Flame retardant performance: Reburning time Smoldering time Damage length | ≤10 S ≤10 S ≤10 cm |
7 | o Heat proof ageing performance(125 C× 24h) | No viscidity or brittleness |
8 | o Cold resistant performance(-25 C×5min, being folded in half) | No fissure |
9 | Gasoline resistant performance(Being # immersed in 120 gasoline for 30S) | No fissure or viscidity |
10 | Total weight of the chemical protective clothing | ≤5 kg |
B. Specification and Structure Model
RFH-I simplified chemical protective clothing is designed in
one-piece structure which protects the whole body of the user
Simplified chemical protective clothing is a kind of special
individual protective clothing with which firemen, emergency rescuer
and workers in plants or labs can enter places full of solid or liquid
acid or alkali materials to do rescue and work.
It is not inapplicable to wear simplified chemical protective
clothing on fire or accident locale where there existing poisonous gas.
A. Main Technical Parameters is except face. The chemical protective boots are adhered to the
trousers. The clothing has 3 specifications-- L, M and S. Type L suitable for people 1.8~1.9 meters high,
Type M is suitable for people 1.7~1.8 meters high, Type S is suitable for people below 1.7 meters high.
C. Introduction of Usage
1. Prop the open place of the frock, stretch feet into the trousers to put on the boots, neaten the clothing and lift it to
the waist, then stretch arms into the sleeves.
2. Put on the chemical protective hat, neaten the chest protective cloth of the frock, cover the chest protective cloth
after folding it, and press snap fastener on the chest down.
3.Neaten the hood, coil the elastic band around the neck, and press down the metal snap fastener at the suitable place.
4. Neaten the girdle, and tighten it till you feel comfortable.
5. Put on the gloves, and the gloves should be between two layers of sleeves. The way is as follows: evert first layer of the
sleeve of the chemical protective clothing, and then let the glove
edge outside the inner sleeve of the chemical protective clothing,
put down the first layer of the sleeve of the chemical protective
clothing to clamp the glove between two layers of sleeves.
6. If a breathing apparatus or gas mask is necessary for protecting your breathing, then the mask should stick to users face
tightly and airproof as wearing it.
D. Instruction of Usage and Storage
1. The chemical protective clothing should be used under the environment temperature which is less than 60.
Don not let simplified chemical protective clothing touch flame or other melt materials directly lest the clothing will be broken.
2. Check to assure the clothing is in good condition before using. Do not use it again if it is found broken.
3,On the premise that users vision is not cut off, the hood of the chemical protective clothing should protect users face to
maximum extent during the using course. All snap fastener should
be pressed down, girdle tightened, to reduce the influence of
during movement.
4.In order to avoid injury brought by chemical materials which are of high concentration during the
course of taking off the chemical protective clothing,it must be washed repeatedly or rinsed in a shower of
neutralized liquid to get rid of acids or alkali before taking it off.
5,According to the detail situation, use suds or 0.5~1% sodium carbonate solution to get rid of acid or
alkali materials. Swill the clothing with clean water, and hang it in cool and ventilating place to dry bothsides of the clothing. Do not wash the clothing in dry cleaning way.
6. Make obverse side up as folding the clothing, neaten two sleeves, fold the clothing in half, let boots top face outside,
double it up, let gloves be in the middle position and boots bottom be rolled into a coil, then bag the chemical protective clothing transversely.
7 The chemical protective clothing should be stored in the ventilating and dark place. It should avoid being close to sunshine
and heat resource and contacting active chemical materials and oil.It should not be stored in an environment contaminated by acid or
alkali for long time either.
8,The chemical protective clothing has a storing period of 3 years in the environment which meets all above conditions.